You are viewing an incomplete version of our website. Please click to reload the website as full version.

Rat (Rattus) FOXO1 ELISA Kit

Recommended FOXO1 Product (supplied by: Log in to see )

Antigen
Forkhead Box O1 (FOXO1) ELISA Kits
  • Afxh
  • AI876417
  • fkh1
  • FKH1
  • fkhr
  • Fkhr
  • FKHR
  • Fkhr1
  • FOXO1
  • foxo1
  • FoxO1A
  • FOXO1A
  • foxo1a
  • Foxo1a
  • FoxO1a.1
  • xFoxO1
  • zgc:153388
Reactivity
Rat (Rattus)
Alternatives
Kits with alternative reactivity to:
25
19
18
4
3
3
3
3
2
2
2
2
Methode Type
Sandwich ELISA
Detection Range
0.31-20 ng/mL
Minimum Detection Limit
0.31 ng/mL
Application
ELISA
Supplier
Log in to see
Supplier Product No.
Log in to see
Request

Get this product for free

It's quick and easy to submit your validation proposal. I want to validate this product

Learn more

Available images

Catalog No. ABIN431805
$ 720.00
Plus shipping costs $45.00
Relevance Score ABIN Method Type Sample Type Detection Range Detection Minimum Supplier References Details
0.32693866 ABIN1569888 Sandwich ELISA Serum, Plasma, Tissue Homogenate, Cell Lysate, Cell Culture Supernatant, Biological Fluids 0.313-20 ng/mL 0.313 ng/mL Log in to see
0.0012117105 ABIN1380583 Cell ELISA Log in to see
0.0012117105 ABIN1380582 Cell ELISA Log in to see
0.0012117105 ABIN1380211 Cell ELISA Log in to see
0.0012117105 ABIN1381146 Cell ELISA Log in to see
0.0012117105 ABIN1053799 Serum, Cell Culture Supernatant, Body Fluids, Tissue Homogenate, Plasma Log in to see
0.0012117105 ABIN2113904 Cell ELISA Log in to see
0.0012117105 ABIN2113906 Cell ELISA Log in to see
0.0012117105 ABIN2113905 Cell ELISA Log in to see
0.0012117105 ABIN2113911 Log in to see
0.0012117105 ABIN2113909 Log in to see
0.0012117105 ABIN2113910 Log in to see
0.0012117105 ABIN2113903 Cell ELISA Log in to see
0.0012117105 ABIN2684308 Cell ELISA Cell Samples, Suspension Cell Culture Log in to see
0.0012117105 ABIN2533553 Sandwich ELISA Tissue Homogenate, Biological Fluids 0.313-20 ng/mL 0.313 ng/mL Log in to see
0.0012117105 ABIN2083362 Sandwich ELISA Log in to see
0.0012117105 ABIN2870367 Log in to see
0.0012117105 ABIN2112437 Competition ELISA Log in to see

Top referenced FOXO1 ELISA Kit for ELISA

Similar FOXO1 ELISA Kits

Application / Reactivity Rat (Rattus)
ELISA 19 ELISA Kits

General

Antigen Forkhead Box O1 (FOXO1) ELISA Kits
Reactivity Rat (Rattus)
Kits with alternative reactivity to:
(25), (19), (18), (4), (3), (3), (3), (3), (2), (2), (2), (2)
Methode Type Sandwich ELISA
Detection Range 0.31-20 ng/mL
Minimum Detection Limit 0.31 ng/mL
Application ELISA
Pubmed 2 references available
Supplier Log in to see

Product Details FOXO1 ELISA Kit

Target details Application Details Handling References for FOXO1 Kit (ABIN431805) Images
Purpose The kit is a sandwich enzyme immunoassay for in vitro quantitative measurement of FOXO1 in Tissue Homogenate,Biological Fluids
Sample Type Tissue Homogenate, Cell Lysate, Biological Fluids
Detection Method Colorimetric
Specificity This assay has high sensitivity and excellent specificity for detection of Forkhead Box Protein O1 (FOXO1).
Cross-Reactivity (Details) No significant cross-reactivity or interference between Forkhead Box Protein O1 (FOXO1) and analogues was observed.
Sensitivity 0.119 ng/mL
The sensitivity of this assay, or Lower Limit of Detection (LLD) was defined as the lowest protein concentration that could be differentiated from zero. It was determined by adding two standard deviations - the mean optical density value of twenty zero standard replicates and calculating the corresponding concentration.
Components
  • Pre-coated, ready to use 96-well strip plate - 1
  • Plate sealer for 96 wells - 4
  • Standard (lyophilized) - 2
  • Standard Diluent - 1×20mL
  • Detection Reagent A (green) - 1×120µL
  • Assay Diluent A (2 × concentrate) - 1×6mL
  • Detection Reagent B (red) - 1×120µL
  • Assay Diluent B (2 × concentrate) - 1×6mL
  • TMB Substrate - 1×9mL
  • Stop Solution - 1×6mL
  • Wash Buffer (30 × concentrate) - 1×20mL
  • Instruction manual - 1
Material not included
  • Microplate reader with 450nm filter.
  • Precision single or multi-channel pipettes and disposable tips.
  • Eppendorf Tubes for diluting samples.
  • Deionized or distilled water.
  • Absorbent paper for blotting the microtiter plate.
  • Container for Wash Solution

Target details

Product Details FOXO1 ELISA Kit Application Details Handling References for FOXO1 Kit (ABIN431805) Images back to top
Antigen
Alternative Name FOXO1 (FOXO1 ELISA Kit Abstract)
Pathways PI3K-Akt Signaling, Cell Division Cycle, Fc-epsilon Receptor Signaling Pathway, EGFR Signaling Pathway, Neurotrophin Signaling Pathway

Application Details

Product Details FOXO1 ELISA Kit Target details Handling References for FOXO1 Kit (ABIN431805) Images back to top
Application Notes
  • Limited by the current condition and scientific technology, we cannot completely conduct the comprehensive identification and analysis on the raw material provided by suppliers. So there might be some qualitative and technical risks to use the kit.
  • The final experimental results will be closely related to validity of the products, operation skills of the end users and the experimental environments. Please make sure that sufficient samples are available.
  • Kits from different batches may be a little different in detection range, sensitivity and color developing time.
  • Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied by manufacturer.
  • Protect all reagents from strong light during storage and incubation. All the bottle caps of reagents should be covered tightly to prevent the evaporation and contamination of microorganism.
  • There may be some foggy substance in the wells when the plate is opened at the first time. It will not have any effect on the final assay results. Do not remove microtiter plate from the storage bag until needed.
  • Wrong operations during the reagents preparation and loading, as well as incorrect parameter setting for the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10nm or less and an optical density range of 0-3 O.D. or greater at 450 ± 10nm wavelength is acceptable for use in absorbance measurement. Please read the instruction carefully and adjust the instrument prior to the experiment.
  • Even the same operator might get different results in two separate experiments. In order to get better reproducible results, the operation of every step in the assay should be controlled. Furthermore, a preliminary experiment before assay for each batch is recommended.
  • Each kit has been strictly passed Q.C test. However, results from end users might be inconsistent with our in-house data due to some unexpected transportation conditions or different lab equipments. Intra-assay variance among kits from different batches might arise from above factors, too.
  • Kits from different manufacturers for the same item might produce different results, since we have not compared our products with other manufacturers.
Comment

Information on standard material:
The standard might be recombinant protein or natural protein, that will depend on the specific kit. Moreover, the expression system is E.coli or yeast or mammal cell. There is 0.05% proclin 300 in the standard as preservative.

Information on reagents:
The stop solution used in the kit is sulfuric acid with concentration of 1 mol/L. And the wash solution is TBS. The standard diluent contains 0.02 % sodium azide, assay diluent A and assay diluent B contain 0.01% sodium azide. Some kits can contain is BSA in them.

Information on antibodies:
The provided antibodies and their host vary in different kits.

Sample Volume 100 μL
Assay Time 4.5 h
Plate Pre-coated,Strips (12 x 8)
Protocol The microtiter plate provided in this kit has been pre-coated with an antibody specific to FOXO1. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific for FOXO1.
Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated.
After TMB substrate solution is added, only those wells that contain FOXO1, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color.
The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450 nm ± 10 nm. The concentration of FOXO1 in the samples is then determined by comparing the O.D. of the samples to the standard curve.
  • Prepare all reagents, samples and standards,
  • Add 100 µL standard or sample to each well. Incubate 2 hours at 37 °C,
  • Add 100 µL prepared Detection Reagent A. Incubate 1 hour at 37 °C,
  • Aspirate and wash 3 times,
  • Add 100 µL prepared Detection Reagent B. Incubate 30 minutes at 37 °C,
  • Aspirate and wash 5 times,
  • Add 90 µL Substrate Solution. Incubate 15-25 minutes at 37 °C,
  • Add 50 µL Stop Solution. Read at 450 nm immediately.
Reagent Preparation
  • Bring all kit components and samples to room temperature (18-25°C) before use.
  • Standard - Reconstitute the Standard with 0.5mL of Standard Diluent, kept for 10 minutes at room temperature, shake gently(not to foam). The concentration of the standard in the stock solution is 20ng/mL. Please prepare 7 tubes containing 0.25mL Standard Diluent and produce a double dilution series. Mix each tube thoroughly before the next transfer. Set up 7 points of diluted standard such as 20ng/mL, 10ng/mL, 5ng/mL, 2.5ng/mL, 1.25ng/mL, 0.625ng/mL, 0.312ng/mL, and the last EP tubes with Standard Diluent is the blank as 0ng/mL.
  • Assay Diluent A and Assay Diluent B - Dilute 6mL of Assay Diluent A or B Concentrate(2×) with 6mL of deionized or distilled water to prepare 12 mL of Assay Diluent A or B. (In fact, more than 6mL Assay Diluent A and Assay Diluent B are contained in the bottles. Therefore, in every test, please precisely pipette required amount of Diluent and make double dilution in a new container. The prepared working dilution cannot be frozen.)
  • Detection Reagent A and Detection Reagent B - Briefly spin or centrifuge the stock Detection A and Detection B before use. Dilute to the working concentration with working Assay Diluent A or B, respectively (1:100).
  • Wash Solution - Dilute 20mL of Wash Solution concentrate (30×) with 580mL of deionized or distilled water to prepare 600 mL of Wash Solution (1×).
  • TMB substrate - Aspirate the needed dosage of the solution with sterilized tips and do not dump the residual solution into the vial again.
Note:
  • Making serial dilution in the wells directly is not permitted.
  • Prepare standard within 15 minutes before assay. Please do not dissolve the reagents at 37°C directly.
  • Please carefully reconstitute Standards or working Detection Reagent A and B according to the instruction, and avoid foaming and mix gently until the crystals are completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10µL for once pipetting.
  • The reconstituted Standards, Detection Reagent A and Detection Reagent B can be used only once.
  • If crystals have formed in the Wash Solution concentrate (30×), warm to room temperature and mix gently until the crystals are completely dissolved.
  • Contaminated water or container for reagent preparation will influence the detection result.
Sample Collection Tissue Homogenates: The preparation of tissue homogenates will vary depending upon tissue type. For this assay, rinse tissues in ice-cold PBS (0.02mol/L,pH 7.0-7.2) to remove excess blood thoroughly and weigh before homogenization. Mince the tissues to small pieces and homogenize them in 5-10 mL of PBS with a glass homogenizer on ice (Micro Tissue Grinders work, too). Sonicate the resulting suspension with an ultrasonic cell disrupter or subject it to two freeze-thaw cycles to further break the cell membranes. Centrifugate the homogenates for 5 minutes at 5000 × g. Remove the supernate and assay immediately or aliquot and store at -20°C

Biological Fluids: Centrifuge samples for 20 minutes at 1000 × g. Remove particulates and assay immediately or store samples in aliquot at -20 °C or -80 °C for later use. Avoid repeated freeze/thaw cycles.
Sample Preparation Notes:
  • The supplier is only responsible for the kit itself, but not for the samples consumed during the assay. The user should calculate the possible amount of the samples used in the whole test. Please reserve sufficient samples in advance.
  • Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their particular experiments.
  • If the samples are not indicated in the manual, a preliminary experiment to determine the validity of the kit is necessary.
  • Tissue or cell extraction samples prepared by chemical lysis buffer may cause unexpected ELISA results due to the impacts from certain chemicals.
  • Due to the possibility of mismatching between antigen from other origin and antibody used in our kits (e.g., antibody targets conformational epitope rather than linear epitope), some native or recombinant proteins from other manufacturers may not be recognized by our products.
  • Influenced by the factors including cell viability, cell number or sampling time, samples from cell culture supernatant may not be detected by the kit.
  • Fresh samples without long time storage is recommended for the test. Otherwise, protein degradation and denaturalization may occur in those samples and finally lead to wrong results.
Assay Procedure
  • 1. Determine wells for diluted standard, blank and sample. Prepare 7 wells for standard, 1 well for blank. Add 100 µL each of dilutions of standard (read Reagent Preparation), blank and samples into the appropriate wells. Cover with the Plate sealer. Incubate for 2 hours at 37 °C.
  • 2. Remove the liquid of each well, don't wash.
  • 3. Add 100 µL of Detection Reagent A working solution to each well. Incubate for 1 hour at 37 °C after covering it with the Plate sealer.
  • 4. Aspirate the solution and wash with 350 µL of 1× Wash Solution to each well using a squirt bottle, multi-channel pipette, manifold dispenser or autowasher, and let it sit for 1~2 minutes. Remove the remaining liquid from all wells completely by snapping the plate onto absorbent paper. Totally wash 3 times. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against absorbent paper.
  • 5. Add 100 µL of Detection Reagent B working solution to each well. Incubate for 30 minutes at 37 °C after covering it with the Plate sealer.
  • 6. Repeat the aspiration/wash process for total 5 times as conducted in step 4.
  • 7. Add 90 µL of Substrate Solution to each well. Cover with a new Plate sealer. Incubate for 15 - 25 minutes at 37 °C (Don't exceed 30 minutes). Protect from light. The liquid will turn blue by the addition of Substrate Solution.
  • 8. Add 50 µL of Stop Solution to each well. The liquid will turn yellow by the addition of Stop solution. Mix the liquid by tapping the side of the plate. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
  • 9. Remove any drop of water and fingerprint on the bottom of the plate and confirm there is no bubble on the surface of the liquid. Then, run the microplate reader and conduct measurement at 450 nm immediately.
Note:
  • 1. Assay preparation: Keep appropriate numbers of wells for 1 experiment and remove extra wells from microplate. Rest wells should be resealed and stored at -20 °C.
  • 2. Samples or reagents addition: Please use the freshly prepared Standard. Please carefully add samples to wells and mix gently to avoid foaming. Do not touch the well wall. For each step in the procedure, total dispensing time for addition of reagents or samples to the assay plate should not exceed 10 minutes. This will ensure equal elapsed time for each pipetting step, without interruption. To avoid cross-contamination, change pipette tips between additions of standards, samples, and reagents. Also, use separated reservoirs for each reagent.
  • 3. Incubation: To ensure accurate results, proper adhesion of plate sealers during incubation steps is necessary. Do not allow wells to sit uncovered for extended periods between incubation steps. Once reagents are added to the well strips, DO NOT let the strips DRY at any time during the assay. Incubation time and temperature must be controlled.
  • 4. Washing: The wash procedure is critical. Complete removal of liquid at each step is essential for good performance. After the last wash, remove any remaining Wash Solution by aspirating or decanting and remove any drop of water and fingerprint on the bottom of the plate. Insufficient washing will result in poor precision and false elevated absorbance reading.
  • 5. Controlling of reaction time: Observe the change of color after adding TMB Substrate (e.g. observation once every 10 minutes), if the color is too deep, add Stop Solution in advance to avoid excessively strong reaction which will result in inaccurate absorbance reading.
  • 6. TMB Substrate is easily contaminated. Please protect it from light.
  • 7. The environment humidity which is less than 60 % might have some effects on the final performance, therefore, a humidifier is recommended to be used at that condition.
Calculation of Results Average the duplicate readings for each standard, control, and samples and subtract the average zero standard optical density. Create a standard curve on log-log graph paper, with FOXO1 concentration on the y-axis and absorbance on the x-axis. Draw the best fit straight line through the standard points and it can be determined by regression analysis. Using some plot software, for instance, curve expert 1.30, is also recommended. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
In order to make the calculation easier, we plot the O.D. value of the standard (X-axis) against the known concentration of the standard (Y-axis), although concentration is the independent variable and O.D. value is the dependent variable. However, the O.D. values of the standard curve may vary according to the conditions of assay performance (e.g. operator, pipetting technique, washing technique or temperature effects), plotting log of the data to establish standard curve for each test is recommended. Typical standard curve below is provided for reference only.
Assay Precision Intra-assay Precision (precision within an assay): 3 samples with low, middle and high level rat FOXO1 were tested 20 times on one plate, respectively.
Inter-assay Precision (precision between assays): 3 samples with low, middle and high level rat FOXO1 were tested on 3 different plates, 8 replicates in each plate.
CV (%) = SD/mean X 100
  • Intra-Assay: CV less than 10 %
  • Inter-Assay: CV less than 12 %
Restrictions For Research Use only

Handling

Product Details FOXO1 ELISA Kit Target details Application Details References for FOXO1 Kit (ABIN431805) Images back to top
Precaution of Use The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Handling Advice To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Storage 4 °C/-20 °C
Storage Comment
  • For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 °C upon receipt while the others should be at 0 °C.
  • For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
    Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
  • For ELISA kit, 1 day storage at 30 °C can be considered as 2 months at 0 °C, which means 3 days at 30 °C equaling 6 months at 0 °C.
Expiry Date 6 months

References for FOXO1 Kit (ABIN431805)

Product Details FOXO1 ELISA Kit Target details Application Details Handling Images back to top
Product cited in:

Hegazy, Salama, Mansour, Hassan: "Renoprotective Effect of Lactoferrin against Chromium-Induced Acute Kidney Injury in Rats: Involvement of IL-18 and IGF-1 Inhibition." in: PLoS ONE, Vol. 11, Issue 3, pp. e0151486, 2016

Akbulut, Aktas, Akbulut: "The role of melatonin, sirtuin2 and FoXO1 transcription factor in the aging process of colon in male rats." in: Biogerontology, Vol. 16, Issue 1, pp. 99-108, 2015

Images

Product Details FOXO1 ELISA Kit Target details Application Details Handling References for FOXO1 Kit (ABIN431805) back to top
Supplier Images
ELISA image for FOXO1 ELISA Kit (Forkhead Box O1) (ABIN431805) Forkhead Box O1 (FOXO1) ELISA Kit