Phone:
+1 877 302 8632
Fax:
+1 888 205 9894 (Toll-free)
E-Mail:
orders@antibodies-online.com

CD80 ELISA Kit

CD80 Reactivity: Mouse Colorimetric Sandwich ELISA 62.5-4000 pg/mL Cell Culture Supernatant, Tissue Lysate
Catalog No. ABIN1112557
  • Target See all CD80 ELISA Kits
    CD80
    Reactivity
    • 5
    • 4
    • 4
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Mouse
    Detection Method
    Colorimetric
    Method Type
    Sandwich ELISA
    Detection Range
    62.5-4000 pg/mL
    Minimum Detection Limit
    62.5 pg/mL
    Application
    ELISA
    Purpose
    For quantitative detection of B7-1 in tissue lysates or cell culture supernates.
    Sample Type
    Tissue Lysate, Cell Culture Supernatant
    Analytical Method
    Quantitative
    Sensitivity
    < 10 pg/mL
    Components
    1. One 96-well plate pre-coated with anti-Mouse B7-1 antibody 2. Lyophilized Mouse B7-1 standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Mouse B7-1 antibody (Concentrated): 130 µl.
    Material not included
    1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L
    Featured
    Discover our best selling CD80 ELISA Kit
    Top Product
    Discover our top product CD80 ELISA Kit
  • Comment

    This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-B7-1 polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-B7-1 polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the B7-1 amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of B7-1 can be calculated.

    Plate
    Pre-coated
    Reagent Preparation
    1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.
    Sample Preparation

    Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
    Tissue lysate or body fluids, cell culture supernate: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
    Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 2000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C .
    Plasma: Collect plasma with heparin, citrate or EDTA as the anticoagulant. Centrifuge for 20 min at 2000 x g within 30 min of collection. Analyze immediately or aliquot and store frozen at -20 °C. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

    Restrictions
    For Research Use only
  • Preservative
    Sodium azide, Thimerosal (Merthiolate)
  • Target See all CD80 ELISA Kits
    CD80
    Alternative Name
    CD80 / B7-1 (CD80 Products)
    Synonyms
    B7 ELISA Kit, B7-1 ELISA Kit, B7.1 ELISA Kit, BB1 ELISA Kit, CD28LG ELISA Kit, CD28LG1 ELISA Kit, LAB7 ELISA Kit, B71 ELISA Kit, Cd28l ELISA Kit, Ly-53 ELISA Kit, Ly53 ELISA Kit, MIC17 ELISA Kit, TSA1 ELISA Kit, CD80 molecule ELISA Kit, Cd80 molecule ELISA Kit, CD80 antigen ELISA Kit, CD80 ELISA Kit, Cd80 ELISA Kit
    Background
    Cluster of Differentiation 80 (also CD80 and B7-1) is a protein found on activated B cells and monocytes. B7-1 provides regulatory signals for T lymphocytes as a consequence of binding to the CD28 and CTLA4 ligands of T cells. The CD80 gene has 6 exons that span approximately 32 kb of genomic DNA. The antigen presentation coactivators B7-1 and B7-2 may be important for lymphocytic infiltration and the immune response against thyroid carcinoma.
    Pathways
    TCR Signaling, Fc-epsilon Receptor Signaling Pathway, EGFR Signaling Pathway, Neurotrophin Signaling Pathway, Positive Regulation of Immune Effector Process, Cancer Immune Checkpoints
You are here:
Support