Phone:
+1 877 302 8632
Fax:
+1 888 205 9894 (Toll-free)
E-Mail:
orders@antibodies-online.com

Prostate Specific Antigen ELISA Kit

PSA Reactivity: Human Colorimetric Sandwich ELISA 312-20000 pg/mL
Catalog No. ABIN1112732
  • Target See all Prostate Specific Antigen (PSA) ELISA Kits
    Prostate Specific Antigen (PSA)
    Reactivity
    • 6
    • 4
    • 4
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    Human
    Detection Method
    Colorimetric
    Method Type
    Sandwich ELISA
    Detection Range
    312-20000 pg/mL
    Minimum Detection Limit
    312 pg/mL
    Application
    ELISA
    Analytical Method
    Quantitative
    Sensitivity
    < 10 pg/mL
    Components
    1. One 96-well plate pre-coated with anti-Human Kallikrein 3 antibody 2. Lyophilized Human Kallikrein 3 standards: 2 tubes (20ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-Human Kallikrein 3 antibody (Concentrated): 130 µl.
    Material not included
    1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L
    Featured
    Discover our best selling PSA ELISA Kit
    Top Product
    Discover our top product PSA ELISA Kit
  • Comment

    This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-Kallikrein 3 polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-Kallikrein 3 polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the Kallikrein 3 amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of Kallikrein 3 can be calculated.

    Plate
    Pre-coated
    Reagent Preparation
    1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.
    Sample Preparation

    Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
    Body fluids, tissue lysates and cell culture supernatants: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
    Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 1000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C . Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

    Restrictions
    For Research Use only
  • Preservative
    Sodium azide, Thimerosal (Merthiolate)
  • Target See all Prostate Specific Antigen (PSA) ELISA Kits
    Prostate Specific Antigen (PSA)
    Alternative Name
    Kallikrein 3 / PSA (PSA Products)
    Synonyms
    APS ELISA Kit, KLK2A1 ELISA Kit, PSA ELISA Kit, hK3 ELISA Kit, KLK3 ELISA Kit, Klk1c10l2 ELISA Kit, RSGK-50 ELISA Kit, RSKG-50 ELISA Kit, rGK-3 ELISA Kit, Kal-3 ELISA Kit, Kal3 ELISA Kit, Klk3 ELISA Kit, AAP-S ELISA Kit, MP100 ELISA Kit, Psa ELISA Kit, R74825 ELISA Kit, goku ELISA Kit, kallikrein related peptidase 3 ELISA Kit, kallikrein 3 ELISA Kit, kallikrein 1-related peptidase C3 ELISA Kit, kallikrein B, plasma 1 ELISA Kit, aminopeptidase puromycin sensitive ELISA Kit, KLK3 ELISA Kit, Klk1c3 ELISA Kit, Klkb1 ELISA Kit, Npepps ELISA Kit
    Background
    Prostate-specific antigen (PSA), also known as gamma-seminoprotein or kallikrein-3 (KLK3), is a single-chain glycoprotein with a molecular mass of about 33 kD that may function normally in the liquefaction of seminal coagulum. The PSA gene spans about 6 kb and contains 5 exons. It is a member of the kallikrein-related peptidase family and is secreted by the epithelial cells of the prostate gland. PSA is produced for the ejaculate, where it liquefies semen in the seminal coagulum and allows sperm to swim freely. It is also believed to be instrumental in dissolving cervical mucus, allowing the entry of sperm into the uterus.
    Pathways
    Complement System
You are here:
Support