XPO1 ELISA Kit

Catalog No. ABIN1573142

Product Details XPO1 ELISA Kit

Target: XPO1 (Exportin 1 (XPO1))

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 0.312 ng/mL - 20 ng/mL

Minimum Detection Limit: 0.312 ng/mL

Application: ELISA

Purpose: The kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of XPO1 in human tissue homogenates, cell lysates and other biological fluids.

Sample Type: Cell Lysate, Tissue Homogenate

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of this index.

Cross-Reactivity (Details): No significant cross-reactivity or interference between this index and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross- reactivity detection between this index and all the analogues, therefore, cross reaction may still exist.

Sensitivity: 0.123 ng/mL

Components:

• Pre-coated, ready to use 96-well strip plate
• Standard (freeze dried)
• Standard Diluent
• Detection Reagent A
• Detection Reagent B
• Assay Diluent A
• Assay Diluent B
• TMB
• Stop Solution
• Wash Buffer (30X)
• Plate sealer for 96 wells
• Instruction manual

Material not included:

1. Microplate reader with 450 ± 10nm filter.
2. Precision single or multi-channel pipettes and disposable tips.
3. Eppendorf Tubes for diluting samples.
4. Deionized or distilled water.
5. Absorbent paper for blotting the microtiter plate.
6. Container for Wash Solution.

Application Details

Sample Volume: 100 μL

Assay Time: 1 - 4.5 h

Plate: Pre-coated

Protocol: 1. Prepare all reagents, samples and standards
2. Add 100µL standard or sample to each well. Incubate 2 hours at 37°C
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C
4. Aspirate and wash 3 times
5. Add 100µL prepared Detection Reagent B. Incubate 1 hour at 37°C
6. Aspirate and wash 5 times
7. Add 90µL Substrate Solution. Incubate 15-25 minutes at 37°C
8. Add 50µL Stop Solution. Read at 450nm immediately.

Assay Procedure:

The microtiter plate provided in this kit has been pre-coated with an antibody specific to the index. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific to the index. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain the index, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of the index in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision:

• Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
• Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
• CV(%) = SD/meanX100
• Intra-assay: CV<10%
• Inter-assay: CV<12%

Restrictions: For Research Use only

Handling

Precaution of Use: The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Handling Advice: The stability of ELISA kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.

Storage: 4 °C,-20 °C

Storage Comment: The Assay Plate, Standard, Detection Reagent A and Detection Reagent B should be stored at -20°C upon being received. After receiving the kit , Substrate should be always stored at 4°C.Other reagents are kept according to the labels on vials. But for long term storage, please keep the whole kit at -20°C. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. The test kit may be used throughout the expiration date of the kit (six months from the date of manufacture). Opened test kits will remain stable until the expiring date shown, provided it is stored as prescribed above.

Expiry Date: 12 months

Target Details for XPO1

Target: XPO1 (Exportin 1 (XPO1))

Alternative Name: XPO1 (XPO1 Products)

Synonyms: CG13387 ELISA Kit, CRM1 ELISA Kit, Crm1 ELISA Kit, DCRM1 ELISA Kit, Dmel\\CG13387 ELISA Kit, Emb ELISA Kit, XPO-1 ELISA Kit, XPO1 ELISA Kit, Xpo1 ELISA Kit, crm1 ELISA Kit, dCRM1 ELISA Kit, l(2)k16715 ELISA Kit, 18.m06600 ELISA Kit, DDBDRAFT_0183812 ELISA Kit, DDBDRAFT_0234066 ELISA Kit, DDB_0183812 ELISA Kit, DDB_0234066 ELISA Kit, exportin-1 ELISA Kit, LOC100220104 ELISA Kit, emb ELISA Kit, exp1 ELISA Kit, Xpo ELISA Kit, AA420417 ELISA Kit, Exp1 ELISA Kit, embargoed ELISA Kit, exportin 1 ELISA Kit, putative exportin 1 ELISA Kit, chromosome region maintenance protein 1 ELISA Kit, exportin-1 ELISA Kit, exportin 1 (CRM1 homolog, yeast) ELISA Kit, exportin 1 S homeolog ELISA Kit, emb ELISA Kit, cgd3_3060 ELISA Kit, Tc00.1047053511725.150 ELISA Kit, Tb11.01.5940 ELISA Kit, BBOV_II007220 ELISA Kit, LMJF_32_1100 ELISA Kit, xpo1 ELISA Kit, Xpo1 ELISA Kit, XPO1 ELISA Kit, LOC100165622 ELISA Kit, LOC100633509 ELISA Kit, xpo1.S ELISA Kit

Background: Alternative name: Exp1, CRM1 Homolog,Yeast, Chromosome region maintenance 1 protein homolog

Gene ID: 7514

UniProt: O14980

Pathways: M Phase