Phone:
+1 877 302 8632
Fax:
+1 888 205 9894 (Toll-free)
E-Mail:
orders@antibodies-online.com

PLGF ELISA Kit

PGF Reactivity: Mouse Colorimetric Sandwich ELISA 1-400 pg/mL Cell Culture Supernatant, Plasma, Serum
Catalog No. ABIN1979574
  • Target See all PLGF (PGF) ELISA Kits
    PLGF (PGF) (Placenta Growth Factor (PGF))
    Reactivity
    • 5
    • 5
    • 4
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Mouse
    Detection Method
    Colorimetric
    Method Type
    Sandwich ELISA
    Detection Range
    1-400 pg/mL
    Minimum Detection Limit
    1 pg/mL
    Application
    ELISA
    Purpose
    Mouse PLGF-2 ELISA Kit for cell culture supernatants, plasma, and serum samples.
    Sample Type
    Plasma, Cell Culture Supernatant, Serum
    Analytical Method
    Quantitative
    Specificity
    The sandwich ELISA antibody pair detects Mouse PLGF-2.
    Sensitivity
    1 pg/mL
    Characteristics
    • Strip plates and additional reagents allow for use in multiple experiments
    • Quantitative protein detection
    • Establishes normal range
    • The best products for confirmation of antibody array data
    Components
    • Pre-Coated 96-well Strip Microplate
    • Wash Buffer
    • Stop Solution
    • Assay Diluent(s)
    • Lyophilized Standard
    • Biotinylated Detection Antibody
    • Streptavidin-Conjugated HRP
    • TMB One-Step Substrate
    Material not included
    • Distilled or deionized water
    • Precision pipettes to deliver 2 μL to 1 μL volumes
    • Adjustable 1-25 μL pipettes for reagent preparation
    • 100 μL and 1 liter graduated cylinders
    • Tubes to prepare standard and sample dilutions
    • Absorbent paper
    • Microplate reader capable of measuring absorbance at 450nm
    • Log-log graph paper or computer and software for ELISA data analysis
    Featured
    Discover our best selling PGF ELISA Kit
    Top Product
    Discover our top product PGF ELISA Kit
  • Application Notes
    Recommended Dilution for serum and plasma samples2 fold
    Sample Volume
    100 μL
    Plate
    Pre-coated
    Protocol
    1. Prepare all reagents, samples and standards as instructed in the manual.
    2. Add 100 μL of standard or sample to each well.
    3. Incubate 2.5 h at RT or O/N at 4 °C.
    4. Add 100 μL of prepared biotin antibody to each well.
    5. Incubate 1 h at RT.
    6. Add 100 μL of prepared Streptavidin solution to each well.
    7. Incubate 45 min at RT.
    8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
    9. Incubate 30 min at RT.
    10. Add 50 μL of Stop Solution to each well.
    11. Read at 450 nm immediately.
    Reagent Preparation
    1. Bring all reagents and samples to room temperature (18 - 25 °C) before use. 2. Sample dilution: If your samples need to be diluted, 1x Assay Diluent B (Item E) should be used for dilution of cell culture supernates. Assay Diluent C (Item L) should be used for dilution of serum/plasma. Suggested dilution for normal serum/plasma: 2 fold. Please note that levels of
    Assay Procedure
    1. Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate. 2. Add 100 µL of each standard (see Reagent Preparation step 2) and sample into appropriate wells. Cover well and incubate for 2.5 hours at room temperature or over night at 4 °C with gentle shaking. 3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 myl) using a multi-channel Pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels. 4. Add 100 µL of 1x prepared biotinylated antibody (Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with gentle shaking. 5. Discard the solution. Repeat the wash as in step 3. 6. Add 100 µL of prepared Streptavidin solution (see Reagent Preparation step 7) to each well. Incubate for 45 minutes at room temperature with gentle shaking. 7. Discard the solution. Repeat the wash as in step 3. 8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking. The Mouse PiotaGF-2 ELISA Kit Protocol 6 9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
    Calculation of Results

    Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the average zero standard optical density. Plot the standard curve on log-log graph paper or using Sigma plot software, with standard concentration on the x-axis and absorbance on the y-axis. Draw the best-fit straight line through the standard points.

    Assay Precision
    Intra-Assay: CV<10%
    Inter-Assay: CV<12%
    Restrictions
    For Research Use only
  • Handling Advice
    Avoid repeated freeze-thaw cycles.
    Storage
    -20 °C
    Storage Comment
    The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.
    Expiry Date
    6 months
  • Zhang, Wu, Chen, Zhao: "Mesenchymal stem cells promote cardiac muscle repair via enhanced neovascularization." in: Cellular physiology and biochemistry : international journal of experimental cellular physiology, biochemistry, and pharmacology, Vol. 35, Issue 3, pp. 1219-29, (2015) (PubMed).

  • Target See all PLGF (PGF) ELISA Kits
    PLGF (PGF) (Placenta Growth Factor (PGF))
    Alternative Name
    PLGF-2 (PGF Products)
    Synonyms
    D12S1900 ELISA Kit, PGFL ELISA Kit, PLGF ELISA Kit, PlGF-2 ELISA Kit, SHGC-10760 ELISA Kit, AI854365 ELISA Kit, PIGF ELISA Kit, Plgf ELISA Kit, PlGF ELISA Kit, placental growth factor ELISA Kit, placenta growth factor ELISA Kit, PGF ELISA Kit, Pgf ELISA Kit, PLGF ELISA Kit
    Background
    Placenta growth factor (PlGF)
    Gene ID
    18654
    UniProt
    P49764
    Pathways
    VEGFR1 Specific Signals
You are here:
Support