Phone:
+1 877 302 8632
Fax:
+1 888 205 9894 (Toll-free)
E-Mail:
orders@antibodies-online.com

AKR1B1 ELISA Kit

AKR1B1 Reactivity: Human Colorimetric Sandwich ELISA 0.313-20 ng/mL Plasma, Serum
Catalog No. ABIN5519131
  • Target See all AKR1B1 ELISA Kits
    AKR1B1 (Aldo-Keto Reductase Family 1, Member B1 (Aldose Reductase) (AKR1B1))
    Reactivity
    • 5
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Human
    Detection Method
    Colorimetric
    Method Type
    Sandwich ELISA
    Detection Range
    0.313-20 ng/mL
    Minimum Detection Limit
    0.313 ng/mL
    Application
    ELISA
    Purpose
    The kit is a sandwich enzyme immunoassay technique for the in vitro quantitative measurement in various sample types.
    Sample Type
    Plasma, Serum
    Analytical Method
    Quantitative
    Sensitivity
    0.188 ng/mL
    Components
    • Pre-coated, ready to use 96-well strip plate, flat buttom
    • Plate sealer for 96 wells
    • Reference Standard
    • Reference Standard & Sample Diluent
    • Biotinylated Detection Antibody (100 x concentrate)
    • HRP Conjugate (100 x concentrate)
    • Biotinylated Detection Antibody Diluent
    • HRP Conjugate Diluent
    • Substrate Reagent
    • Stop Solution
    • Wash Buffer (25 x concentrate)
    • Instruction manual
    Featured
    Discover our best selling AKR1B1 ELISA Kit
    Top Product
    Discover our top product AKR1B1 ELISA Kit
  • Sample Volume
    100 µL
    Assay Time
    1 - 4.5 h
    Plate
    Pre-coated
    Protocol
    1. Add 100 µL standard or sample to each well. Incubate for 90 min at 37 °C.
    2. Remove the liquid. Add 100 µL Biotinylated Detection Antibody. Incubate for 1 hour at 37 °C.
    3. Aspirate and wash 3 times.
    4. Add 100 µL HRP Conjugate. Incubate for 30 min at 37 °C.
    5. Aspirate and wash 5 times.
    6. Add 90 µL Substrate Reagent. Incubate for 15 min at 37 °C.
    7. Add 50 µL Stop Solution. Read at 450 nm immediately.
    8. Calculation of results.
    Reagent Preparation
    1. Bring all reagents to room temperature (18~25 °C) before use. Follow the Microplate reader manual for set-up and preheat it for 15 min before OD measurement.
    2. Wash Buffer: Dilute 30 mL of Concentrated Wash Buffer with 720 mL of deionized or distilled water to prepare 750 mL of Wash Buffer.Note: if crystals have formed in the concentrate, warm it in a 40 °C water bath and mix it gently until the crystals have completely dissolved
    3. Standard working solution: Centrifuge the standard at 10,000xg for 1 min. Add 1.0 mL of Reference Standard &Sample Diluent, let it stand for 10 min and invert it gently several times. After it dissolves fully, mix it thoroughly with a pipette. This reconstitution produces a working solution of 20 ng/mL. Then make serial dilutions as needed. The recommended dilution gradient is as follows: 20, 10, 5, 2.5, 1.25, 0.63, 0.31, 0 ng/mL. Dilution method: Take 7 EP tubes, add 500 μLof Reference Standard & Sample Diluent to each tube. Pipette 500 μLof the 20 ng/mL working solution to the first tube and mix up to produce a 10 ng/mL working solution. Pipette 500 μLof the solution from the former tube into the latter one according to these steps. The illustration below is for reference. Note: the last tube is regarded as a blank. Don't pipette solution into it from the former tube.
    4. Biotinylated Detection Antibody working solution: Calculate the required amount before the experiment (100 μL/well). In preparation, slightly more than calculated should be prepared. Centrifuge the stock tube before use, dilute the 100x Concentrated Biotinylated Detection Antibody to 1xworking solution with Biotinylated Detection Antibody Diluent.
    5. Concentrated HRP Conjugate working solution: Calculate the required amount before the experiment (100 μL/well). In preparation, slightly more than calculated should be prepared. Dilute the 100x Concentrated HRP Conjugate to 1x working solution with Concentrated HRP Conjugate Diluent.
    Restrictions
    For Research Use only
  • Storage
    4 °C/-20 °C
    Storage Comment
    The unopened kit can be stored at 4℃ for 1 month. If the kit is not used within 1 month, store the items separately according to the conditions since the kit is received.
  • Target See all AKR1B1 ELISA Kits
    AKR1B1 (Aldo-Keto Reductase Family 1, Member B1 (Aldose Reductase) (AKR1B1))
    Alternative Name
    AR(Aldose reductase) (AKR1B1 Products)
    Synonyms
    ADR ELISA Kit, ALDR1 ELISA Kit, ALR2 ELISA Kit, AR ELISA Kit, ALDRED ELISA Kit, ALR-P-I ELISA Kit, Akr1b3 ELISA Kit, Akr1b4 ELISA Kit, Aldr1 ELISA Kit, Alr ELISA Kit, RATALDRED ELISA Kit, akr1b7 ELISA Kit, zgc:86611 ELISA Kit, aldo-keto reductase family 1 member B ELISA Kit, aldo-keto reductase family 1, member B1 (aldose reductase) ELISA Kit, aldo-keto reductase family 1, member B1 (aldose reductase) S homeolog ELISA Kit, AKR1B1 ELISA Kit, Akr1b1 ELISA Kit, akr1b1.S ELISA Kit, akr1b1 ELISA Kit
    Pathways
    Metabolism of Steroid Hormones and Vitamin D, C21-Steroid Hormone Metabolic Process, Monocarboxylic Acid Catabolic Process
You are here:
Support