Did you know that you can buy products from over 140 different suppliers from us?

Phosphofructokinase (PFK) ELISA Kit

Details for Product No. ABIN456135
Request Want additional data for this product?

The Independent Validation Initiative strives to provide you with high quality data. Find out more

Target Name (Antigen)
Synonyms BG02836, CG3400, Dmel\\CG3400, BcDNA.GH12192, BcDNA:GH12192, CG4001, Dmel\\CG4001, PFK, l(2)06339, pfk
Alternatives Cow (Bovine)
Kits with alternative reactivity to:
(1), (1), (1)
Methode Type Sandwich ELISA
Quantity 96 tests
Shipping to United States (Change)
Availability Will be delivered in 11 to 13 Business Days
Request Want additional data for this product?

The Independent Validation Initiative strives to provide you with high quality data. Find out more

Catalog No. ABIN456135
1,210.00 $
Plus shipping costs $45.00

Order hotline:

  • +1 404 474 4654
  • +1 888 205 9894 (TF)
Purpose This immunoassay kit allows for the specific measurement of bovine PFK concentrations in tissue homogenates, serum, and plasma.
Sample Type Tissue Homogenate, Serum, Plasma
Detection Method Colorimetric
Specificity This assay recognizes recombinant and natural bovine PFK.
Cross-Reactivity (Details) No significant cross-reactivity or interference was observed.
Components Reagent (Quantity): Assay plate (1), Standard (2), Sample Diluent (1x20ml), Assay Diluent A (1x10ml), Assay Diluent B (1x10ml), Detection Reagent A 1×120µl Detection Reagent B 1×120µl 2 Wash Buffer(25 x concentrate) (1x30ml), Substrate (1x10ml), Stop Solution (1x10ml)
Background Phosphofructokinase (PFK) is a glycolytic enzyme that catalyzes the irreversible transfer of a phosphate from ATP to fructose-6-phosphate. PFK is the key regulatory enzyme for glycolysis. When ATP levels are high in the cell, the cell no longer needs metabolic energy production to occur. In this case, PFK's activity is inhibited by allosteric regulation by ATP itself, closing the valve on the flow of carbohydrates through glycolysis. Recall that allosteric regulators bind to a different site on the enzyme than the active (catalytic) site. Thus ATP binds in two places on PFK: in the active site as a substrate and in the regulatory site as a negative modulator. ATP bound in the regulatory site acts as a modulator by lowering the affinity of PFK for its other substrate, fructose-6-phosphate.
Sample Volume 100 µL
Plate Pre-coated,96 wells
Protocol This assay employs the quantitative sandwich enzyme immunoassay technique. A monoclonal antibody specific for PFK has been pre-coated onto a microplate. Standards and samples are pipetted into the wells and any PFK present is bound by the immobilized antibody. An enzyme-linked monoclonal antibody specific for PFK is added to the wells. Following a wash to remove any unbound antibody-enzyme reagent, a substrate solution is added to the wells and color develops in proportion to the amount of PFK bound in the initial step. The color development is stopped and the intensity of the color is measured.
Reagent Preparation Bring all reagents to room temperature before use. Wash Buffer - If crystals have formed in the concentrate, warm to room temperature and mix gently until the crystals have completely dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to prepare 500 mL of Wash Buffer. Standard - Reconstitute the Standard with 1.0 mL of Sample Diluent. This reconstitution produces a stock solution of 100 U/mL. Allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making serial dilutions. The undiluted standard serves as the high standard (100 U/mL). The Sample Diluent serves as the zero standard (0 U/mL). Detection Reagent A and B - Dilute to the working concentration specified on the vial label using Assay Diluent A and B (1:100), respectively.
Sample Collection Tissue homogenates - The preparation of tissue homogenates will vary depending upon tissue type. For this assay, tissue was rinsed with 1X PBS to remove excess blood, homogenized in 20 mL of 1X PBS and stored overnight at ≤ -20 °C. After two freeze-thaw cycles were performed to break the cell membranes, the homogenates were centrifuged for 5 minutes at 5000 x g. Remove the supernate and assay immediately or aliquot and store at ≤ -20 °C. Serum - Use a serum separator tube (SST) and allow samples to clot for 30 minutes before centrifugation for 15 minutes at approximately 1000 x g. Remove serum and assay immediately or aliquot and store samples at -20 °C. Plasma - Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 15 minutes at 1000 x g at 2 - 8 °C within 30 minutes of collection. Store samples at ≤ -20 °C. Avoid repeated freeze-thaw cycles. Note: Citrate plasma has not been validated for use in this assay.
Assay Procedure 3 Allow all reagents to reach room temperature. Arrange and label required number of strips.
1. Prepare all reagents, working standards and samples as directed in the previous sections.
2. Add 100 uL of Standard, Control, or sample per well. Cover with the adhesive strip. Incubate for 2 hours at 37 °C.
3. Remove the liquid of each well, don’t wash.
4. Add 100 uL of Detection Reagent A to each well. Incubate for 1 hour at 37°C. Detection Reagent A may appear cloudy. Warm to room temperature and mix gently until solution appears uniform.
5. Aspirate each well and wash, repeating the process three times for a total of three washes. Wash by filling each well with Wash Buffer (350 uL) using a squirt bottle, multi-channel pipette, manifold dispenser or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
6. Add 100 uL of Detection Reagent B to each well. Cover with a new adhesive strip.Incubate for 1 hours at 37 °C.
7. Repeat the aspiration/wash as in step
5. 8. Add 90 uL of Substrate Solution to each well. Incubate for 30 minutes at room temperature. Protect from light.
9. Add 50 uL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
10. Determine the optical density of each well within 30 minutes, using a microplate reader set to 450 nm.
Important Note:
1. The wash procedure is critical. Insufficient washing will result in poor precision and falsely elevated absorbance readings.
2. It is recommended that no more than 32 wells be used for each assay run if manual pipetting is used since pipetting of all standards, specimens and controls should be completed within 5 minutes. A full plate of 96 wells may be used if automated pipetting is available.
3. Duplication of all standards and specimens, although not required, is recommended.
4. When mixing or reconstituting protein solutions, always avoid foaming.
5. To avoid cross-contamination, change pipette tips between additions of each standard level, between sample additions, and between reagent additions. Also, use separate reservoirs for each reagent.
6. To ensure accurate results, proper adhesion of plate sealers during incubation steps is necessary.
Calculation of Results Average the duplicate readings for each standard, control, and sample and subtract the average zero standard optical density. Create a standard curve by reducing the data using computer 4 software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a standard curve by plotting the mean absorbance for each standard on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the PFK concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
Restrictions For Research Use only
Handling Advice 1. The kit should not be used beyond the expiration date on the kit label.
2. Do not mix or substitute reagents with those from other lots or sources.
3. If samples generate values higher than the highest standard, further dilute the samples with the Assay Diluent and repeat the assay. Any variation in standard diluent, operator, pipetting technique, washing technique,incubation time or temperature, and kit age can cause variation in binding.
4. This assay is designed to eliminate interference by soluble receptors, ligands, binding proteins, and other factors present in biological samples. Until all factors have been tested in the Immunoassay, the possibility of interference cannot be excluded.
Storage 4 °C/-20 °C
Storage Comment The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 °C upon being received. The other reagents can be stored at 4 °C.
Validation Images
back to top