Phone:
+1 877 302 8632
Fax:
+1 888 205 9894 (Toll-free)
E-Mail:
orders@antibodies-online.com

ADAM Metallopeptidase with thrombospondin Type 1 Motif, 18 (ADAMTS18) ELISA Kit ELISA Kit

ADAMTS18 Reactivity: Human Colorimetric Sandwich ELISA 6.25 ng/mL - 400 ng/mL Plasma, Serum, Tissue Homogenate
Catalog No. ABIN6975784
$910.56
Plus shipping costs $45.00
96 tests
local_shipping Shipping to: United States
Available
  • Target
    ADAM Metallopeptidase with thrombospondin Type 1 Motif, 18 (ADAMTS18)
    Reactivity
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Human
    Detection Method
    Colorimetric
    Method Type
    Sandwich ELISA
    Detection Range
    6.25 ng/mL - 400 ng/mL
    Minimum Detection Limit
    6.25 ng/mL
    Application
    ELISA
    Purpose
    For the quantitative determination of human A disintegrin and metalloproteinase with thrombospondin motifs 18 (ADAMTS18) concentrations in serum, plasma, tissue homogenates.
    Sample Type
    Plasma, Serum, Tissue Homogenate
    Analytical Method
    Quantitative
    Specificity
    This assay has high sensitivity and excellent specificity for detection of human ADAMTS18. No significant cross-reactivity or interference between human ADAMTS18 and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross-reactivity detection between human ADAMTS18 and all the analogues, therefore, cross reaction may still exist.
    Sensitivity
    1.56 ng/mL
    Components
    • Assay plate
    • Standard
    • HRP-avidin (100 x concentrate)
    • Biotin-antibody (100 x concentrate)
    • Sample Diluent
    • HRP-avidin Diluent
    • Biotin-antibody Diluent
    • Wash Buffer (25 x concentrate)
    • TMB Substrate
    • Stop Solution
    • Adhesive Strip
  • Application Notes
    Optimal working dilution should be determined by the investigator.
    Sample Volume
    100 μL
    Assay Time
    1 - 4.5 h
    Plate
    Pre-coated
    Reagent Preparation
    1. Biotin-antibody (1x) - Centrifuge the vial before opening. Biotin-antibody requires a 100-fold dilution. A suggested 100-fold dilution is 10 μL of Biotin-antibody + 990 μL of Biotin-antibody Diluent.
    2. HRP-avidin (1x) - Centrifuge the vial before opening. HRP-avidin requires a 100-fold dilution. A suggested 100-fold dilution is 10 μL of HRP-avidin + 990 μL of HRP-avidin Diluent.
    3. Wash Buffer (1x) - If crystals have formed in the concentrate, warm up to room temperature and mix gently until the crystals have completely dissolved. Dilute 20 mL of Wash Buffer Concentrate (25 x) into deionized or distilled water to prepare 500 mL of Wash Buffer (1 x).
    4. Standard Centrifuge the standard vial at 6000-10000rpm for 30s. Reconstitute the Standard with 1.0 mL of Sample Diluent. Do not substitute other diluents. This reconstitution produces a stock solution of 400 ng/mL. Mix the standard to ensure complete reconstitution and allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making dilutions. Pipette 250 μL of Sample Diluent into each tube (S0-S6). Use the stock solution to produce a 2-fold dilution series (below). Mix each tube thoroughly before the next transfer. The undiluted Standard serves as the high standard (400 ng/mL). Sample Diluent serves as the zero standard (0 ng/mL).
    Note:
    • Kindly use graduated containers to prepare the reagent. Please don't prepare the reagent directly in the Diluent vials provided in the kit.
    • Bring all reagents to room temperature (18-25 °C) before use for 30 min.
    • Prepare fresh standard for each assay. Use within 4 hours and discard after use.
    • Making serial dilution in the wells directly is not permitted.
    • Please carefully reconstitute Standards according to the instruction, and avoid foaming and mix gently until the crystals have completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10 μL for once pipetting.
    • Distilled water is recommended to be used to make the preparation for reagents or samples. Contaminated water or container for reagent preparation will influence the detection result.
    Assay Precision
    Intra-assay Precision (Precision within an assay): CV%<8% Three samples of known concentration were tested twenty times on one plate to assess.
    Inter-assay Precision (Precision between assays): CV%<10% Three samples of known concentration were tested in twenty assays to assess.
    Restrictions
    For Research Use only
  • Storage
    4 °C,-20 °C
    Storage Comment
    Unopened kit Store at 2 - 8°C. Do not use the kit beyond the expiration date. May be stored for up to 1 month at 2 - 8°C. Coated assay Try to keep it in a sealed aluminum foil bag, plate and avoid the damp. Standard May be stored for up to 1 month at 2 - 8° C. If Biotin-antibody don't make recent use, better keep it store at HRP-avidin -20°C. Biotin-antibody Diluent Opened kit HRP-avidin Diluent Sample May be stored for up to 1 month at 2 - 8°C. Diluent Wash Buffer TMB Substrate Stop Solution *Provided this is within the expiration date of the kit.
    Expiry Date
    6 months
  • Target
    ADAM Metallopeptidase with thrombospondin Type 1 Motif, 18 (ADAMTS18)
    Alternative Name
    ADAM metallopeptidase with thrombospondin type 1 motif, 18 (ADAMTS18 ELISA Kit Abstract)
    Synonyms
    9630038L21, ADAMTS21, E130314N14Rik, KNO2, RGD1560118, a disintegrin-like and metallopeptidase (reprolysin type) with thrombospondin type 1 motif, 18, ADAM metallopeptidase with thrombospondin type 1 motif 18, ADAM metallopeptidase with thrombospondin type 1 motif, 18, Adamts18, ADAMTS18
    Background

    Abbreviation: ADAMTS18

    Alias: ADAMTS21, a disintegrin-like and metalloprotease (reprolysin type) with thrombospondin type 1 motif, 18|a disintegrin-like and metalloprotease (reprolysin type) with thrombospondin type 1 motif, 21|

    UniProt
    Q8TE60
You are here:
help Support