S100A10 ELISA Kit

Catalog No. ABIN5658547

This Mouse S100A10 ELISA Kit is a Colorimetric ELISA Kit designed to quantify Mouse S100A10.

Quick Overview for S100A10 ELISA Kit (ABIN5658547)

Target: S100A10 (S100 Calcium Binding Protein A10 (S100A10))

Reactivity: Mouse

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 31.25 pg/mL - 2000 pg/mL

Application: ELISA

Sample Type: Cell Lysate, Plasma, Serum, Tissue Homogenate

Product Details S100A10 ELISA Kit

Minimum Detection Limit: 31.25 pg/mL

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of S100 Calcium Binding Protein A10 (S100A10). No significant cross-reactivity or interference between S100 Calcium Binding Protein A10 (S100A10) and analogues was observed.

Sensitivity: 12.9 pg/mL

Application Details

Comment:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to S100 Calcium Binding Protein A10 (S100A10). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to S100 Calcium Binding Protein A10 (S100A10). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain S100 Calcium Binding Protein A10 (S100A10), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of S100 Calcium Binding Protein A10 (S100A10) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level S100 Calcium Binding Protein A10 (S100A10) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level S100 Calcium Binding Protein A10 (S100A10) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 4-8 months

Target Details for S100A10

Target: S100A10 (S100 Calcium Binding Protein A10 (S100A10))

Alternative Name: S100 Calcium Binding Protein A10

Background:

Gene Name: S100 Calcium Binding Protein A10

Gene Aliases: ANX2L, ANX2LG, CAL1L, CLP11, GP11, P11, P10, Calpactin-1 light chain, Cellular ligand of annexin II, Annexin II Ligand,Calpactin I,Light Polypeptide

Gene ID: 20194

UniProt: P08207

Pathways: S100 Proteins