C1ql1 ELISA Kit

Catalog No. ABIN5653210

The Human C1ql1 ELISA Kit (ABIN5653210) is a Colorimetric ELISA Kit designed to quantify Human C1ql1.

Quick Overview for C1ql1 ELISA Kit (ABIN5653210)

Target: C1ql1 (C1qL1) (Complement Component 1, Q Subcomponent-Like 1 (C1qL1))

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 0.156 ng/mL - 10 ng/mL

Application: ELISA

Sample Type: Plasma, Serum, Tissue Homogenate

Product Details C1ql1 ELISA Kit

Minimum Detection Limit: 0.156 ng/mL

Purpose: Human Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1) ELISA Kit for detecting C1qL1 in serum, plasma, tissue homogenates

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1). No significant cross-reactivity or interference between Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1) and analogues was observed.

Sensitivity: 0.063 ng/mL

Components:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• TMB Substrate
• Stop Solution
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Material not included:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Application Details

Application Notes: Optimal working dilution should be determined by the investigator.

Comment:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Sample Volume: 100 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Complement Component 1, Q Subcomponent Like Protein 1 (C1qL1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 12 months

Target Details for C1ql1

Target: C1ql1 (C1qL1) (Complement Component 1, Q Subcomponent-Like 1 (C1qL1))

Alternative Name: Complement Component 1, Q Subcomponent Like Protein 1

Background: Gene Aliases: CRF, C1QRF, CTRP14, C1q-related factor, C1q and tumor necrosis factor-related protein 14

Gene ID: 10882

UniProt: O75973