PTH CLIA Kit

Catalog No. ABIN5657630

Rat PTH ELISA Kit, Chemiluminescent assay for quantification of Rat PTH.

Quick Overview for PTH CLIA Kit (ABIN5657630)

Target: PTH (Parathyroid Hormone (PTH))

Reactivity: Rat

Detection Method: Chemiluminescent

Method Type: Competition ELISA

Detection Range: 7.81 pg/mL - 2000 pg/mL

Application: ELISA

Sample Type: Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Homogenate

Product Details PTH CLIA Kit

Minimum Detection Limit: 7.81 pg/mL

Purpose: Rat Parathyroid Hormone (PTH) CLIA Kit for detecting PTH in serum, plasma, tissue homogenates, cell lysates, cell culture supernates

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Parathyroid Hormone (PTH). No significant cross-reactivity or interference between Parathyroid Hormone (PTH) and analogues was observed.

Sensitivity: 2.65 pg/mL

Components:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• Substrate A
• Substrate B
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Material not included:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Application Details

Application Notes: Optimal working dilution should be determined by the investigator.

Comment:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Sample Volume: 50 μL

Assay Time: 2 h

Plate: Pre-coated

Protocol: The microplate provided in this kit has been pre-coated with a monoclonal antibody specific to Parathyroid Hormone (PTH). A competitive inhibition reaction is launched between biotin labeled Parathyroid Hormone (PTH) and unlabeled Parathyroid Hormone (PTH) (Standards or samples) with the pre-coated antibody specific to Parathyroid Hormone (PTH). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Parathyroid Hormone (PTH) in the sample. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is reverse proportional to the Parathyroid Hormone (PTH) level in the sample or standard.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Parathyroid Hormone (PTH) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Parathyroid Hormone (PTH) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 12 months

Target Details

Target: PTH (Parathyroid Hormone (PTH))

Alternative Name: Parathyroid Hormone

Target Type: Hormone

Background: Gene Aliases: iPTH, Intact Parathyroid Hormone, Parathormone, Parathyrin

Gene ID: 24694

UniProt: P04089

Pathways: cAMP Metabolic Process, Regulation of Carbohydrate Metabolic Process