RPS19 ELISA Kit

Catalog No. ABIN8056573

The Mouse RPS19 ELISA Kit (ABIN8056573) is a Colorimetric ELISA Kit designed to quantify Mouse RPS19.

Quick Overview for RPS19 ELISA Kit (ABIN8056573)

Target: RPS19 (Ribosomal Protein S19 (RPS19))

Reactivity: Mouse

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 0.312 ng/mL - 20 ng/mL

Application: ELISA

Sample Type: Cell Lysate, Tissue Homogenate

Product Details RPS19 ELISA Kit

Minimum Detection Limit: 0.312 ng/mL

Purpose: ELISA Kit for Ribosomal Protein S19 (RPS19)

Analytical Method: Quantitative

Specificity:

This assay has high sensitivity and excellent specificity for detection of Ribosomal Protein S19 (RPS19).
No significant cross-reactivity or interference between Ribosomal Protein S19 (RPS19) and analogues was observed.

Sensitivity: < 0.116 ng/mL

Components:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Material not included:

• Microplate reader with 450 ± 10nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Application Details

Sample Volume: 100 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: 1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 2 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Assay Precision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Ribosomal Protein S19 (RPS19) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Ribosomal Protein S19 (RPS19) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Storage: 4 °C,-20 °C

Storage Comment:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Expiry Date: 6 months

Target Details for RPS19

Target: RPS19 (Ribosomal Protein S19 (RPS19))

Alternative Name: Ribosomal Protein S19

Background: DBA, Diamond-Blackfan Anemia, 40S ribosomal protein S19

Pathways: Positive Regulation of Immune Effector Process, Ribonucleoprotein Complex Subunit Organization, Ribosome Assembly