Fibrinogen beta Chain ELISA Kit

Catalog No. ABIN8056752

This Colorimetric ELISA kit is designed for the quantitative measurement of Mouse Fibrinogen beta Chain.

Quick Overview for Fibrinogen beta Chain ELISA Kit (ABIN8056752)

Target: Fibrinogen beta Chain (FGB)

Reactivity: Mouse

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 15.6 ng/mL - 1000 ng/mL

Application: ELISA

Sample Type: Plasma

Grade: Small Sample

Product Details Fibrinogen beta Chain ELISA Kit

Minimum Detection Limit: 15.6 ng/mL

Purpose: Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

Analytical Method: Quantitative

Specificity:

This assay has high sensitivity and excellent specificity for detection of Mini Samples Fibrinogen Beta Chain (FGB).
No significant cross-reactivity or interference between Mini Samples Fibrinogen Beta Chain (FGB) and analogues was observed.

Sensitivity: < 6.2 ng/mL

Components:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Material not included:

• Microplate reader with 450 ± 10nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Application Details

Sample Volume: 25 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: 1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well. Incubate 1 hour at 37°C;
3. Aspirate and add 25µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 25µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 25µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 20µL Stop Solution. Read at 450nm immediately.

Assay Precision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Fibrinogen Beta Chain (FGB) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Fibrinogen Beta Chain (FGB) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Storage: 4 °C,-20 °C

Storage Comment:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Expiry Date: 6 months

Target Details for Fibrinogen beta Chain

Target: Fibrinogen beta Chain (FGB)

Alternative Name: Fibrinogen Beta Chain

Background: FG-B, Fibrinopeptide B, Fibrinogen Beta

UniProt: Q8K0E8