Pituitary Adenylate Cyclase Activating Peptide ELISA Kit

Catalog No. ABIN5651436

This Colorimetric ELISA kit is designed for the quantitative measurement of Mouse Pituitary Adenylate Cyclase Activating Peptide.

Quick Overview for Pituitary Adenylate Cyclase Activating Peptide ELISA Kit (ABIN5651436)

Target: Pituitary Adenylate Cyclase Activating Peptide

Reactivity: Mouse

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 7.8 pg/mL - 500 pg/mL

Application: ELISA

Sample Type: Plasma, Serum, Tissue Homogenate

Product Details

Minimum Detection Limit: 7.8 pg/mL

Purpose: Mouse Pituitary Adenylate Cyclase Activating Peptide (PACAP) ELISA Kit for detecting PACAP in serum, plasma, tissue homogenates

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1). No significant cross-reactivity or interference between Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1) and analogues was observed.

Sensitivity: 3.0 pg/mL

Components:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• TMB Substrate
• Stop Solution
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Material not included:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Application Details

Application Notes: Optimal working dilution should be determined by the investigator.

Comment:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Sample Volume: 100 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Adenylate Cyclase Activating Polypeptide 1, Pituitary (ADCYAP1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 12 months

Target Details

Target: Pituitary Adenylate Cyclase Activating Peptide

Background: Gene Aliases: ADCYAP1, PRP-48, Pituitary Adenylate Cyclase Activating Peptide

Gene ID: 11516

UniProt: O70176