CD59 ELISA Kit

Catalog No. ABIN5658185

Human CD59 ELISA Kit, Colorimetric assay for quantification of Human CD59.

Quick Overview for CD59 ELISA Kit (ABIN5658185)

Target: CD59

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 12.5 pg/mL - 800 pg/mL

Application: ELISA

Sample Type: Cell Lysate, Plasma, Serum

Product Details CD59 ELISA Kit

Minimum Detection Limit: 12.5 pg/mL

Purpose: Human Cluster of Differentiation 59 (CD59) ELISA Kit for detecting CD59 in serum, plasma, cell lysates

Analytical Method: Quantitative

Specificity: This assay has high sensitivity and excellent specificity for detection of Protectin (CD59). No significant cross-reactivity or interference between Protectin (CD59) and analogues was observed.

Sensitivity: 5.4 pg/mL

Components:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• TMB Substrate
• Stop Solution
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Material not included:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Application Details

Application Notes: Optimal working dilution should be determined by the investigator.

Comment:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Sample Volume: 100 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Protectin (CD59). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Protectin (CD59). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Protectin (CD59), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Protectin (CD59) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Assay Precision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Protectin (CD59) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Protectin (CD59) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Storage: 4 °C,-20 °C

Storage Comment: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Expiry Date: 12 months

Target Details for CD59

Target: CD59

Alternative Name: Cluster of Differentiation 59

Background: Gene Aliases: Protectin, MIC11, MIN1, MIN2, MIN3, MSK21, MAC-IP, MACIF, MIRL, HRF20, Complement Regulatory Protein, 20 kDa homologous restriction factor, Membrane attack complex inhibition factor

Gene ID: 966

UniProt: P13987

Pathways: Complement System