INHBE CLIA Kit

Catalog No. ABIN8056077

This Chemiluminescent ELISA kit is designed for the quantitative measurement of Human INHBE.

Quick Overview for INHBE CLIA Kit (ABIN8056077)

Target: INHBE (Inhibin, beta E (INHBE))

Reactivity: Human

Detection Method: Chemiluminescent

Method Type: Sandwich ELISA

Detection Range: 1.37 pg/mL - 1000 pg/mL

Application: ELISA

Sample Type: Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Homogenate

Product Details INHBE CLIA Kit

Minimum Detection Limit: 1.37 pg/mL

Purpose: CLIA Kit for Inhibin Beta E (INHbE)

Analytical Method: Quantitative

Specificity:

This assay has high sensitivity and excellent specificity for detection of Inhibin Beta E (INHbE).
No significant cross-reactivity or interference between Inhibin Beta E (INHbE) and analogues was observed.

Sensitivity: < 0.54 pg/mL

Components:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• Substrate A
• Substrate B
• Wash Buffer (30X)
• Instruction manual

Material not included:

• Luminometer capable of reading 96-well microplates with the following parameters: lag time 30.0secs; read time 1.0 sec/well
• Single or multi-channel pipettes with high precision and disposable tips.
• Microcentrifuge Tubes.
• Deionized or distilled water.
• Absorbent paper for blotting the microplate.
• Container for Wash Solution.
• 0.01mol/L (or 1×) Phosphate Buffered Saline(PBS), pH7.0-7.2

Application Details

Sample Volume: 100 μL

Assay Time: 3 h

Plate: Pre-coated

Protocol: 1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 2 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Assay Precision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Inhibin Beta E (INHbE) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Inhibin Beta E (INHbE) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Restrictions: For Research Use only

Handling

Handling Advice:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Storage: 4 °C,-20 °C

Storage Comment:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Expiry Date: 6 months

Target Details

Target: INHBE (Inhibin, beta E (INHBE))

Alternative Name: Inhibin Beta E

Background: INH-bE, Activin beta-E chain

UniProt: P58166

Pathways: Peptide Hormone Metabolism, Hormone Activity, SARS-CoV-2 Protein Interactome