DLL3 ELISA Kit

Catalog No. ABIN8056913

Human DLL3 ELISA Kit, Colorimetric assay for quantification of Human DLL3.

Quick Overview for DLL3 ELISA Kit (ABIN8056913)

Target: DLL3 (delta Like Protein 3 (DLL3))

Reactivity: Human

Detection Method: Colorimetric

Method Type: Sandwich ELISA

Detection Range: 15.6 pg/mL - 1000 pg/mL

Application: ELISA

Sample Type: Cell Culture Supernatant, Cell Samples, Plasma, Serum, Tissue Lysate

Product Details DLL3 ELISA Kit

Minimum Detection Limit: 15.6 pg/mL

Purpose: Human DLL3 (Delta-like protein 3) ELISA Kit

Analytical Method: Quantitative

Specificity: Specifically binds with DLL3 , no obvious cross reaction with other analogues.

Sensitivity: 9.375 pg/mL

Components:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Biotin-labeled Antibody
• HRP-Streptavidin Conjugate(SABC
• 100X)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Material not included:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Application Details

Application Notes: Optimal working dilution should be determined by the investigator.

Comment:

Sandwich ELISA, Double Antibody

Assay Time: 4 h

Plate: Pre-coated

Protocol: Step 1: Add 100 µL standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37 °C. Washing: Wash the plate twice without immersing. Step 2: Add 100 µL biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Restrictions: For Research Use only

Handling

Handling Advice: Avoid direct light exposure to antibody solutions

Storage: 4 °C

Storage Comment: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Expiry Date: 12 months

Target Details for DLL3

Target: DLL3 (delta Like Protein 3 (DLL3))

Alternative Name: DLL3

Background: Delta-like protein 3|Drosophila Delta homolog 3|Delta3|DLL3

UniProt: Q9NYJ7

Pathways: Notch Signaling