ADAMTS4 ELISA Kit
-
- Target See all ADAMTS4 ELISA Kits
- ADAMTS4 (ADAM Metallopeptidase with Thrombospondin Type 1 Motif, 4 (ADAMTS4))
- Binding Specificity
- AA 213-685
-
Reactivity
- Human
- Detection Method
- Colorimetric
- Method Type
- Sandwich ELISA
- Detection Range
- 625-40.000 pg/mL
- Minimum Detection Limit
- 625 pg/mL
- Application
- ELISA
- Purpose
- Sandwich High Sensitivity ELISA kit for Quantitative Detection of Human ADAMTS4
- Brand
- PicoKine™
- Sample Type
- Cell Culture Supernatant, Serum, Plasma (heparin), Plasma (EDTA)
- Analytical Method
- Quantitative
- Specificity
-
Expression system for standard: CHO
Immunogen sequence: F213-C685 - Cross-Reactivity (Details)
- There is no detectable cross-reactivity with other relevant proteins.
- Sensitivity
- <20pg/mL
- Material not included
- Microplate reader in standard size. Automated plate washer. Adjustable pipettes and pipette tips. Multichannel pipettes are recommended in the condition of large amount of samples in the detection. Clean tubes and Eppendorf tubes. Washing buffer (neutral PBS or TBS). Preparation of 0.01M TBS: Add 1.2g Tris, 8.5g Nacl
- Immunogen
-
Expression system for standard: CHO
Immunogen sequence: F213-C685 - Featured
- Discover our best selling ADAMTS4 ELISA Kit
- Top Product
- Discover our top product ADAMTS4 ELISA Kit
-
-
- Application Notes
- Before using Kit, spin tubes and bring down all components to bottom of tube. Duplicate well assay was recommended for both standard and sample testing.
- Comment
-
Sequence similarities: Contains 1 disintegrin domain.
Tissue Specificity: Expressed in brain, lung and heart. Expressed at very low level in placenta and skeletal muscles. Isoform 2 is detected in osteoarthritic synovium. .
- Plate
- Pre-coated
- Protocol
- human ADAMTS4 ELISA Kit was based on standard sandwich enzyme-linked immune-sorbent assay technology. A monoclonal antibody from mouse specific for ADAMTS4 has been precoated onto 96-well plates. Standards(CHO, F213-C685) and test samples are added to the wells, a biotinylated detection polyclonal antibody from goat specific for ADAMTS4 is added subsequently and then followed by washing with PBS or TBS buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with PBS or TBS buffer. HRP substrate TMB was used to visualize HRP enzymatic reaction. TMB was catalyzed by HRP to produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional to the human ADAMTS4 amount of sample captured in plate.
- Assay Procedure
-
Aliquot 0.1 mL per well of the 40,000pg/mL, 20,000pg/mL, 10,000pg/mL, 5,000pg/mL, 2,500pg/mL, 1,250pg/mL, 625pg/mL human ADAMTS4 standard solutions into the precoated 96-well plate. Add 0.1 mL of the sample diluent buffer into the control well (Zero well). Add 0.1 mL of each properly diluted sample of human cell culture supernates, serum or plasma(heparin, EDTA) to each empty well. See "Sample Dilution Guideline" above for details. It is recommended that each human ADAMTS4 standard solution and each sample be measured in duplicate.
- Assay Precision
-
- Sample 1: n=16, Mean(ng/ml): 5.9, Standard deviation: 0.248, CV(%): 4.2
- Sample 2: n=16, Mean(ng/ml): 12, Standard deviation: 0.612, CV(%): 5.1
- Sample 3: n=16, Mean(ng/ml): 21, Standard deviation: 1.2, CV(%): 5.7,
- Sample 1: n=24, Mean(ng/ml): 6.5, Standard deviation: 0.377, CV(%): 5.8
- Sample 2: n=24, Mean(ng/ml): 14, Standard deviation: 0.882, CV(%): 6.3
- Sample 3: n=24, Mean(ng/ml): 23, Standard deviation: 1.66, CV(%): 7.2
- Restrictions
- For Research Use only
-
- Handling Advice
- Avoid multiple freeze-thaw cycles.
- Storage
- -20 °C,4 °C
- Storage Comment
- Store at 4°C for 6 months, at -20°C for 12 months. Avoid multiple freeze-thaw cycles
- Expiry Date
- 12 months
-
- Target See all ADAMTS4 ELISA Kits
- ADAMTS4 (ADAM Metallopeptidase with Thrombospondin Type 1 Motif, 4 (ADAMTS4))
- Alternative Name
- ADAMTS4 (ADAMTS4 Products)
- Synonyms
- 3830423K05 ELISA Kit, ADAM-TS4 ELISA Kit, ADAMTS-2 ELISA Kit, ADMP-1 ELISA Kit, mKIAA0688 ELISA Kit, ADAMTS-4 ELISA Kit, ADAMTS4 ELISA Kit, a disintegrin-like and metallopeptidase (reprolysin type) with thrombospondin type 1 motif, 4 ELISA Kit, ADAM metallopeptidase with thrombospondin type 1 motif 4 ELISA Kit, ADAM metallopeptidase with thrombospondin type 1 motif, 4 ELISA Kit, Adamts4 ELISA Kit, ADAMTS4 ELISA Kit
- Background
-
Protein Function: Cleaves aggrecan, a cartilage proteoglycan, and may be involved in its turnover. May play an important role in the destruction of aggrecan in arthritic diseases. Could also be a critical factor in the exacerbation of neurodegeneration in Alzheimer disease. Cleaves aggrecan at the '392-Glu-|-Ala-393' site.
Background: ADAMTS4, A disintegrin and metalloproteinase with thrombospondin motifs 4 is an enzyme that in humans is encoded by the ADAMTS4 gene. ADAMTS4 is a member of the large ADAMTS family of zinc-dependent proteases. The human ADAMTS4 gene is mapped to chromosome 1 by somatic cell hybrid analysis. The enzyme encoded by this gene lacks a C-terminal TS motif. It is responsible for the degradation of aggrecan, a major proteoglycan of cartilage, and brevican, a brain-specific extracellular matrix protein. The cleavage of aggrecan and brevican suggests key roles of this enzyme in arthritic disease and in the central nervous system, potentially, in the progression of glioma.
Synonyms: A disintegrin and metalloproteinase with thrombospondin motifs 4,ADAM-TS 4,ADAM-TS4,ADAMTS-4,3.4.24.82,ADMP-1,Aggrecanase-1,ADAMTS4,KIAA0688,UNQ769/PRO1563,
Full Gene Name: A disintegrin and metalloproteinase with thrombospondin motifs 4
Cellular Localisation: Secreted, extracellular space, extracellular matrix. - Gene ID
- 9507
- UniProt
- O75173
-